EUG 3/4 Pumped storage and various Power plants

EUG 3/4 Pumped storage and various Power plants

In the power plants course, the way the following types of power plant operate is covered:

  • Lignite power plants
  • Coal-fired power plants
  • Gas turbine power plants
  • Gas and steam power plants
  • Biogas combined heat and power (cogeneration) plants
  • Nuclear power plants
  • Hydroelectric power plants

The pumped storage power plant course analyses how electrical energy can be stored by transforming it into potential energy of water and then transforming it back into electrical energy again for feeding to the grid. Pumped storage plants are becoming increasingly necessary due to the increase in renewable energy generation and also provide indispensable energy storage capacity in a high-quality smart grid.

Training contents:

  • Setting up synchronisation
    • Putting a multi-function relay into operation
  • Generator operation
  • Grid synchronisation
    • Setting parameters for a multi-function relay
    • Automatic synchronisation
  • Manual power regulation for generators and motors
  • Generator control using SCADA
  • Power plants
    • Types of power plant
    • Typical characteristic curves and parameters
    • Commissioning and operation of various types of power station
    • Finding out how power plants work
    • Automatic load following with externally measured active and reactive power
  • Pumped storage power plants in a smart grid
Basic equipment set, consisting of:
1
HMI (Human Machine Interface) for generators
HMI (Human Machine Interface) for generators CO3301-5L
1
Synchronization Unit
Synchronization Unit CO3212-6V
1
Multi-function relay, power controller, cos-phi controller, synchronizing unit
Multi-function relay, power controller, cos-phi controller, synchronizing unit CO3301-5W
1
Power switch module
Power switch module CO3301-5P
1
Variable Ohmic load, three-phase, 1kW
Variable Ohmic load, three-phase, 1kW CO3301-3F
1
Inductive load, three-phase, 1kW
Inductive load, three-phase, 1kW CO3301-3D
1
Three-phase synchronous machine with smooth core rotor, 1 kW
Three-phase synchronous machine with smooth core rotor, 1 kW SE2682-5Q
Additionally required, dynamic servo machine test stand:
1
Servo machine test stand for 1kW machines incl. software ActiveServo (D,GB,F,E)
Servo machine test stand for 1kW machines incl. software ActiveServo (D,GB,F,E) CO3636-6Y
1
Rubber coupling sleeve for 1kW machines
Rubber coupling sleeve for 1kW machines SE2662-6A
1
Coupling guard with LED lighting for 1kW machines
Coupling guard with LED lighting for 1kW machines SE2662-7D
Power supply:
1
Three-phase power supply with motor protection switch
Three-phase power supply with motor protection switch CO3212-5V
1
Exciter voltage controller with de-excitation
Exciter voltage controller with de-excitation CO3301-5G
1
Motor protection switch, 3 pole, 1.8-2.5A
Motor protection switch, 3 pole, 1.8-2.5A CO3212-1P
1
Multiple socket outlet, 6 fold, with illuminated switch
Multiple socket outlet, 6 fold, with illuminated switch ST8010-4J
Measuring instruments:
1
Three-phase power quality meter, display and long-term memory
Three-phase power quality meter, display and long-term memory CO5127-1S
Media:
1
Interactive Lab Assistant: Pumped-Storage power station
Interactive Lab Assistant: Pumped-Storage power station SO2800-3V
1
Interactive Lab Assistant: Power Plants
Interactive Lab Assistant: Power Plants SO2800-3W
Additionally recommended:
1
Interactive Lab Assistant: AC Synchronisation and Automatic Generator Control
Interactive Lab Assistant: AC Synchronisation and Automatic Generator Control SO2800-3T
1
Interactive Lab Assistant: Generator protection
Interactive Lab Assistant: Generator protection SO2800-3U
Software:
1
Patch cable Cat5E 1x 1 m yellow, 2x 2 m yellow
Patch cable Cat5E 1x 1 m yellow, 2x 2 m yellow LM9057
1
USB 2.0 Ethernet adapter, 10/100
USB 2.0 Ethernet adapter, 10/100 LM8257
1
5-Port Ethernet Switch
5-Port Ethernet Switch LM9988
Accessories:
40
Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R
7
Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V
5
Safety connecting plug 4mm with tap (2x), gr/ye, 1000V/32A CAT II
Safety connecting plug 4mm with tap (2x), gr/ye, 1000V/32A CAT II SO5126-3W
1
Set of safety measurement cables, 4mm, 31 pcs
Set of safety measurement cables, 4mm, 31 pcs SO5148-1L
2
Safety measurement cable 4mm, 50cm/20", black, 600V CAT III ~1000V CAT II / 32A
Safety measurement cable 4mm, 50cm/20", black, 600V CAT III ~1000V CAT II / 32A SO5126-8L
2
Safety measurement cable 4mm, 150cm/60", brown, 600V CAT III ~1000V CAT II / 32A
Safety measurement cable 4mm, 150cm/60", brown, 600V CAT III ~1000V CAT II / 32A SO5126-9J
2
Safety measurement cable 4mm, 150cm/60", black, 600V CAT III ~1000V CAT II / 32A
Safety measurement cable 4mm, 150cm/60", black, 600V CAT III ~1000V CAT II / 32A SO5126-9G
2
Safety measurement cable 4mm, 150cm/60", grey, 600V CAT III ~1000V CAT II / 32A
Safety measurement cable 4mm, 150cm/60", grey, 600V CAT III ~1000V CAT II / 32A SO5126-9N
3
Safety measurement cable 4mm, 150cm/60", blue, 600V CAT III ~1000V CAT II / 32A
Safety measurement cable 4mm, 150cm/60", blue, 600V CAT III ~1000V CAT II / 32A SO5126-9K
1
SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm
SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm ST7200-7A
1
Protected power distribution for working stations
Protected power distribution for working stations ST8008-8N
Additionally recommended:
1
Monitor holder for flat screen monitor of weight up to 15kg/33lbs
Monitor holder for flat screen monitor of weight up to 15kg/33lbs ST8010-4T
1
Keyboard adapter for flat screen monitor holders
Keyboard adapter for flat screen monitor holders ST8010-4G
1
Display for Pump Storage Power Plant equipment
Display for Pump Storage Power Plant equipment ST8000-4K
1
ST7200-5L