Item No.: ST7200-4C

Mobile aluminum experiment stand, 3 levels, power strip with 6 sockets,(1250 x 1970 x 700 mm)

High-quality mobile experiment and demonstration trolley from the SybaPro range featuring aluminium table legs and low-level shelf.
This trolley is suitable for mounting under-table cabinets and is compatible with all add-ons and extensions in the SybaPro range.

It is supplied with one shelf, an angle bracket for attaching a PC and a cable holder.

Table top + Shelf:

  • 30-mm table top made of highly compressed, multi-layer fine chipboard conforming to DIN EN 438-1
  • Colour grey, RAL 7035, with 0.8-mm slightly textured laminate coating (Resopal) on both sides, conforming to DIN 16926
  • Resistant to many chemicals and reagents including dilute acids and alkalis
  • Resistant to heat, e.g. molten solder or heating at specific points such as by soldering tips or cigarette ends
  • Frame with solid impact-resistant protective edging made of 3 mm thick RAL 7047 coloured plastic
  • Coating and adhesive are PVC free
  • Power strip with 6 outlet sockets mounted underneath the table top, lead and earthed plug

Frame:

  • 2 extruded aluminium profiles with multiple grooves 1800 x 120 x 40 mm (WxHxD)
  • 8 equally sized grooves in extruded aluminium profiles (3 on each side and 1 each on the front and back)
  • Grooves accommodate standard industrial mountings
  • 4 H-shaped aluminium profiles, 1150 mm, for 3-layer organisation of DIN A4 panels
  • Space for extension of power supply duct
  • Base made of rectangular tubing with 4 swiveling double casters, 2 of which have brakes
  • Table frame made of tough combination of rectangular tubing around the full perimeter
  • Acid-resistant epoxy-resin coating, 80 µm thick (approx.), colour RAL 7047

Cable holder: 

  • Width 200 mm with 12 cable slots to accommodate 48 x 4-mm safety measurement leads

PC attachment bracket:

  • With 3 screw-on rubber stoppers, dimensions 65x65x114 mm approx. (top fixing for PC)

> The height of the cable holder and PC attachment bracket can be adjusted along the aluminium profiles
> For attachment to left or right, fastening materials included
> Acid-resistant epoxy-resin powder coating of thickness 80 µm approx., colour RAL 7047

Dimensions:

  • Height of table top 760 mm
  • 1250 x 1970 x 700 mm (WxHxD)
  • The mobile experiment stand will be delivered fully assembled.