SybaPro system wall-type workstation, 3-level, 2000x1975x400mm (WHD)

High quality upright/wall-type workstation with SybaPro triangular power duct aluminium profile columns. The workstation is equipped with a configurable profile frame as a 3-level training panel mounting frame to accommodate diverse technical training equipment.
The triangular aluminium profile columns as power duct are also designed to accommodate different power supply units.
The workstation is compatible with all the components and expansion modules of the SybaPRO systems and for that reason is extremely versatile in terms of its outfitting and expansion capabilities.
Combined system power ducts of the SybaPro range permits integration of additional SybaPower media supply units as well as measurement, testing and output devices. In the outer profile grooves, add-on components such as PC and monitor brackets can also be mounted.

Table top:

• 30mm table top made of highly compressed, multi-layered fine chipboard conforming to DIN EN 438-1, grey coloured,  RAL7035
• Height of table top 400mm
• Slightly textured 0.8mm laminate coating (HPL) conforming to DIN 16926 on both sides
• Resistant to many chemicals and reagents, such as dilute acids and bases
• Resistant to heat, e.g. liquid solder and point heating caused by soldering irons or burning cigarettes
• Table-top frame with solid, impact-resistant edging made of 3mm-thick, coloured ABS plastic, colour RAL7047
• Table top coating and ABS edging are PVC-free
• The table top height adjustment is infinitely variable

Frame and columns:

• Side sections made of aluminium profile columns in a triangular shape as power duct 
• Powder-coated, standard colour: grey (RAL7047), other colours also available
• Designed to accommodate various devices for supply of power and safety protection (no additional power ducting required)
• 6 identical grooves inside the extruded aluminium-profile (2 on each side + 1 each per end)
• Grooves to accommodate industry-standard equipment holders
• Equipped with up to 11x1 MU modules per side (various media supply units) above (7ME) and below (4ME) the table top
• Pre-wired with power supply bus system for special MU inserts or panels
• Terminal strips for connection to on-site power supply
• High-current quick-connectors of IP20 protection class according to DIN EN 61984:2009
• Power ducts can also accommodate additional wiring inside them
• Each column with integrated level compensation (adjustment range 0-40mm)
  • Optional with 400mm-long floor supports/feet with dual level compensation (adjustment range 0-40mm)
  • Floor supports/feet with 2 drill holes for floor mounting, which means the workstation can also be positioned anywhere in the room (additional reinforcement up to the ceiling recommended)
  • The addition of feet/floor supports raises the overall height by at least 30mm (1975mm >> 2005mm + optional 0-40mm of possible level compensation adjustment range)
• Infinitely variable height adjustable table frames made of rigid rectangular tubing combination of at least ST37 around all four sides with additional centre cross strut to boost stability
• Acid-resistant epoxy-resin coating (approx. 80µm thick), colour grey RAL7047

Configurable frame profiles/training panel frames:

• 3-rows available for accommodating training panels in DIN A4 format = height: 297mm
• Natural brushed-aluminium/anodised profiles to accommodate training panels
• Inward-facing brush strips ensure firm basis and avoid noise due to vibration
• Includes all required fastening materials

Variable wall mounting:

• Including 4x adjustable mounting brackets, continuously variable mounting possible throughout the profile range
• Depth adjustment range: 170mm, which means adjustable wall distance of 155 - 325mm

Dimensions:

• Table top height (standard setting) 760mm
• Dimensions 2000x1975x400mm (only workstation (w x h x d])
• Total depth incl. mounting bracket = 555 - 725mm