SybaPro wall-type workstation, 3-level, 1200x1975x400mm (WHD)

High-quality SybaPro upright/wall-type workstation with aluminium profile columns and configurable frame profiles as  3-level training panel frames used to accommodate diverse technical training equipment.
The workstation is compatible with all the components and expansion modules of the SybaPRO systems and for that reason is extremely versatile in terms of its outfitting and expansion capabilities.
Possible combination with power ducts permits integration of additional SybaPower media supply units as well as measurement, testing and output devices.
In the outer profile grooves, add-on components such as PC and monitor brackets can also be mounted.

Table top:

• 30mm table top made of highly compressed, multi-layered fine chipboard conforming to DIN EN 438-1, grey coloured,  RAL7035
• Height of table top 400mm
• Slightly textured laminate coating (HPL) conforming to DIN 16926 on both sides
• Resistant to many chemicals and reagents, such as dilute acids and bases
• Resistant to heat, e.g. liquid solder and point heating caused by soldering irons or burning cigarettes.
• Table-top frame with solid, impact-resistant edging made of 3mm-thick, coloured ABS plastic, colour RAL7047
• Table top coating and ABS edging are PVC-free
• The table top height is continuously adjustable

Frame and columns:

• All table columns are made of extruded aluminium with multi-groove profile
• 8 identical grooves inside the extruded aluminium-profile (3 on each side + 1 each per end)
• Grooves to accommodate industry-standard equipment holders
• Two separate cable ducts inside for wiring
• Each aluminium column with integrated level compensation (adjustment range 0-40mm)
  • Optional with 400mm-long floor supports/feet with dual level compensation (adjustment range 0-40mm)
  • Floor supports/feet with 2 drill holes for floor mounting, which means the workstation can also be positioned anywhere in the room (additional reinforcement up to the ceiling recommended)
  • The addition of feet/floor supports raises the overall height by at least 30mm (1975mm >> 2005mm + optional 0-40mm of possible level compensation adjustment range)
• Continuously variable height adjustable table frames made of rigid rectangular tubing combination of at least ST37 around all four sides with additional centre cross strut to boost stability
• Acid-resistant epoxy-resin coating (approx. 80µm thick), colour grey RAL7047

Configurable frame profiles/training panel mounting frames:

• 3-rows available for accommodating training panels in DIN A4 format = height: 297mm
• Natural brushed-aluminium/anodised profiles to accommodate training panels
• Inward-facing brush strips ensure firm basis and avoid noise due to vibration
• Includes all required fastening materials

Variable wall mounting:

• Including 4x adjustable mounting brackets, continuously variable mounting possible throughout the profile range
• Depth adjustment range: 170mm, which means adjustable wall distance of 155 - 325mm

Dimensions:

• Table top height (standard setting) 760mm
• Dimensions 1200x1975x400mm (workstation only [w x h x d])
• Total depth incl. mounting bracket = 555 - 725mm