EEM 4.5-3 Fault simulation on electrical machines 300W

EEM 4.5-3 Fault simulation on electrical machines 300W

The fault simulator can be simply plugged into a three-phase asynchronous machine. Thanks to the lockable fault switches, a wide variety of typical faults can be activated. These can be found and analyzed using measuring equipment routinely found in industrial applications. Repair strategies can be derived based on the measurement results. All measurements are undertaken with the equipment de-energized.

Training contents:

  • Winding breaks in coils
  • Winding to winding insulation fault
  • Winding to housing insulation fault
  • Combination of different faults
  • Fault assessment and practical repair instructions
  • Proper handling of insulation meters

Weboffer

 0 Article
Equipment set / product

Basic equipment set, consisting of:
1
Fault simulator for three-phase asynchronous squirrel-cage motor
Fault simulator for three-phase asynchronous squirrel-cage motor SE2662-9D
1
Three-phase asynchronous motor, 0.3 kW n=1400 (400V/690V)
 Three-phase asynchronous motor, 0.3 kW n=1400 (400V/690V) SE2683-1G
1
Insulation tester "Insu 10"
 Insulation tester "Insu 10" LM2333
Media:
1
Interactive Lab Assistant: Fault simulation on electrical machines 0.3 kW
 Interactive Lab Assistant: Fault simulation on electrical machines 0.3 kW SO2805-1E
Additionally required, dynamic servo machine test stand:
1
Dynamic servo machine test system for 0.3kW machines incl. software ActiveServo
 Dynamic servo machine test system for 0.3kW machines incl. software ActiveServo CO3636-6X
1
Rubber coupling sleeve for 300W machines
 Rubber coupling sleeve for 300W machines SE2662-2A
1
Coupling guard with LED lighting for 300W machines
 Coupling guard with LED lighting for 300W machines SE2662-7C
Power supply:
1
Three-phase power supply with motor protection switch
 Three-phase power supply with motor protection switch CO3212-5V
Measuring instruments:
1
Power-Multimeter
 Power-Multimeter CO5127-2A
Accessories:
1
Set of safety measurement cables, 4mm, 31 pcs
 Set of safety measurement cables, 4mm, 31 pcs SO5148-1L
20
Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R
2
Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V
2
Safety connecting plug 4mm with tap (2x), gr/ye, 1000V/32A CAT II
 Safety connecting plug 4mm with tap (2x), gr/ye, 1000V/32A CAT II SO5126-3W
1
SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm
 SybaPro experiment trolley, 3-level, 6 sockets, 1250x1970x800mm ST7200-7A
1
Protected power distribution for working stations
 Protected power distribution for working stations ST8008-8N
Additionally recommended:
1
Display for Electrical Machines equipment
 Display for Electrical Machines equipment ST8000-5A
1
Monitor holder for flat screen monitor of weight up to 15kg/33lbs
 Monitor holder for flat screen monitor of weight up to 15kg/33lbs ST8010-4T
1
Protection cover for three-level experiment trolleys
 Protection cover for three-level experiment trolleys ST7200-5L