Lerninhalte Stetigventiltechnik - ProportionalhydraulikZur Vermittlung von hydraulischem Know-how
Training contents continuous valve technology - proportional hydraulics
Lucas-Nülle offers you various workstations with grilles for the clean and safe reception of industrial components and various learning topics for imparting hydraulic know-how in training and further education. The standard components used at the workstation can be found later in their professional careers in machines and systems.
Learning content:
Through logically structured, practice-oriented exercises, the trainee:
- understand the physical laws of proportional valves such as pressure difference, opening cross section and volume flow,
- get to know and apply the legal requirements and safety regulations,
- Use the most important symbols of proportional hydraulics, read the circuit diagrams,
- get to know and understand the meaning and mode of action of setpoint setting, ramp function and signal sequences,
- practice setting, commissioning and optimising an electro-hydraulic system,
- determine characteristic values and derive characteristic curves from them.
Further project tasks in the field of switching and electro-hydraulics:
- Identify components
- initial operation
- function of a pressure relief valve
- Control of a hydraulic cylinder by a directional valve
- Simulating loads on the hydraulic cylinder by means of a one-way flow control valve
- Influence of the inlet throttling on the travel speed of a hydraulic cylinder
- Influence of variable system pressures on the travel speed of a hydraulic cylinder
- Influence of variable load pressures on the travel speed of a hydraulic cylinder
- Effect of a sequence throttling (pressure ratio)
- Function of a pressure reducing valve
- Drive unit/pump
- Directional control valves and drives
- blocking valves
- flow valves
- Pressure valves and pressure switches
- hydraulic accumulators
- application circuits
- Commissioning and maintenance
- hydraulic power pack
- Hydropump/Variable displacement pump characteristic curve
- Differential cylinder/pressure ratio
- Differential cylinder/flow rate
- Cylinder, load pressure
- Set cylinder speed
- non-return valve
- Check valve, hydraulically pilot operated
- Throttle valve, adjustable
- one-way-restrictor
- current regulation valve
- Pressure relief valve, directly controlled
- Pressure relief valve control
- pressure reducing valve
- press keys
- Pressure switch / Hysteresis
- hydraulic accumulators
- differential switching
- Rapid traverse creep feed control
- valve circulation control
- Commissioning, inspection, maintenance, troubleshooting, repair