EWI 3/4 Assembly exercises for door bell and stairway lighting systems

EWI 3/4 Assembly exercises for door bell and stairway lighting systems

These assembly exercises focus on mechanical skills. All exercises are of an extremely practical nature. All parts, except for consumables (wires) can be reused. The following exercises are undertaken in this course:

  • Assembly and wiring

  • Intercom system with door opener

  • Building intercom and bell systems

  • Testing and commissioning of the circuits in accordance with circuit and installation diagrams

  • Assembly and wiring of entrance and building intercom systems with and without call-back in accordance with circuit and installation diagrams

  • Testing and commissioning of the circuits

 

Weboffer

 0 Article
Equipment set / product

Equipment set comprising the following:
1
Set of installation materials, EWI 3
Set of installation materials, EWI 3 SE2670-1D
1
Set of wiring materials, EWI 3
Set of wiring materials, EWI 3 SE2670-1P
1
Set of installation materials, EWI 4
Set of installation materials, EWI 4 SE2670-1F
Media:
1
Manual EWS 3/4 Wiring practice with bell and intercom systems
 Manual EWS 3/4 Wiring practice with bell and intercom systems SH5001-3B
Power supply:
1
SE2501-1G
Measuring instruments:
1
Voltage, phase + continuity tester with field direction indicator, max. 690V
 Voltage, phase + continuity tester with field direction indicator, max. 690V LM8554
1
Multi13S digital multimeter
 Multi13S digital multimeter LM2330
Accessories:
1
Storage tray for SE boxes, reinforced, for 10 boxes
 Storage tray for SE boxes, reinforced, for 10 boxes ST7004-2B
2
Storage tray for installation materials I, reinforced base
 Storage tray for installation materials I, reinforced base ST7004-2J
1
Set of fixing materials, punched hole frame
Set of fixing materials, punched hole frame SE2669-3A
1
Set of fixing materials, punched hole frame (100pcs)
Set of fixing materials, punched hole frame (100pcs) SE2669-3C
1
Set of tools ''Electric ''
Set of tools ''Electric '' SE2670-4B
5
Safety measurement cable (4 mm), 100 cm, black, 600 V, CAT III ~ 1000 V, CAT II / 32 A
 Safety measurement cable (4 mm), 100 cm, black, 600 V, CAT III ~ 1000 V, CAT II / 32 A SO5126-8V
1
Safety measurement cable (4 mm), 100cm/40", blue, 600 V, CAT III ~ 1000 V, CAT II / 32 A
 Safety measurement cable (4 mm), 100cm/40", blue, 600 V, CAT III ~ 1000 V, CAT II / 32 A SO5126-9A
1
Safety measurement cable (4 mm), 100 cm, green/yellow, 600 V, CAT III ~ 1000 V, CAT II / 3
Safety measurement cable (4 mm), 100 cm, green/yellow, 600 V, CAT III ~ 1000 V, CAT II / 3 SO5126-9C
1
Mobile aluminum experiment stand, 3 levels, power strip with 6 sockets, 49"x28"x79" WxDxH (1250x700x1995mm)
 Mobile aluminum experiment stand, 3 levels, power strip with 6 sockets, 49"x28"x79" WxDxH (1250x700x1995mm) ST7200-4C
1
Punched hole panel, interchangeable, for 1200 mm panel mounting frames
Punched hole panel, interchangeable, for 1200 mm panel mounting frames ST8003-5Q

Alternative mounting solution:
1
Punched hole wiring installation cabin kit, 3 sides + roof, inside 1.2 x 1.2 x 2.0
 Punched hole wiring installation cabin kit, 3 sides + roof, inside 1.2 x 1.2 x 2.0 ST8003-6C
1
Ergo45° 3 HU power duct, 580 mm, for twin wiring installation cabin, horizontal 114 PU
 Ergo45° 3 HU power duct, 580 mm, for twin wiring installation cabin, horizontal 114 PU ST8033-3U
1
Full-width front plate (type 1) for six-sided power supply duct 114PU
 Full-width front plate (type 1) for six-sided power supply duct 114PU ST8070-4C