Item No.: LM9720

CNC milling machine with professional software

The CNC milling machine can be used in both conventional and CNC mode. The equipment included is as follows:

  • Drive power, 1.4 k W, 230 V, 50/60 Hz
  • Spindle speed 140 - 3000 rpm
  • Work bench 450 x 180 mm
  • MK2 live centre
  • Horizontal X axis, 260 mm
  • Vertical Z axis, 280 mm
  • Transverse Y axis, 150 mm
  • Carriage speeds: X and Y axes 30-1200 mm/min, Z axis 30-800 mm/min
  • Pivoting protective cover
  • Cutting head can pivot 90° in either direction
  • Fine inching drive along Z axis
  • Depth stop for drill
  • Connecting lead between PC and controller
  • Control unit with built-in integrated controls and feed motors
  • Ball bearing spindles for all three axes
  • Machine safety cabin with integrated coolant system
  • PC coupling board, 0-10 V for regulating the speed of the 1.4- k W motor via PC

 

Professional milling machine software

The supplied professional milling machine software makes it possible to go from design of a product to the finished piece in the simplest of fashions. Even complex contours can be transferred to the CNC machine for processing from any drawing in DXF or HPGL format with the aid of simple and easy-to-use software. In addition, users can directly create drawings using the software itself or work on the piece can be programmed using G and M codes. The software makes automated manufacture possible using the tool changer as well as allowing cutting of threads in CNC mode, the use of an electronic manual control and high carriage speeds.
Functionality:

  • Programming as per DIN 66025 using G and M codes plus graphic programming
  • Graphic simulation of process with a representation of the tool bit
  • Automatic CNC programming
  • Manual control
  • Dialog-oriented user interface
  • Data import from DXF, HPGL or STL files with conversion into operable programs
  • Entry of technical data
  • Creation of contours using an integrated CAD module allowing programming of dimensions
  • Machine-independent programming: CNC programs can be created on various PCs without the CNC cutter being connected, i.e. while the lathe is being used to work on one piece, new programs can be created on another PC.
  • To write the programs and control the CNC cutter, a PC is needed (not included).
  • Dimensions: 670 x 900 x 610 mm³ (HxWxD)
  • Weight: 200 kg

 

Weboffer

 0 Article
Equipment set / product

Downloads

Printable version