EPE 51-3 Field-oriented control of asynchronous machine with MATLAB - Simulink 300W

EPE 51-3 Field-oriented control of asynchronous machine with MATLAB - Simulink 300W

Training objectives:

  • Setting up a hardware-in-the-loop system under real-time conditions
  • Modelling and designing cascade closed-loop control for a DC motor on an ongoing design level
  • Reducing the control system to discrete components to run on a digital signal processor
  • Creation and optimization of automatic flow-rate and speed controllers
  • Park- und Clarke transformation
  • Integration of the space phasor modulation to optimize the control of the IGBT
  • Speed detection using incremental sensors
  • Comparison of simulation results with actual measurements
Basic equipment set, consisting of:
1
Self-commutated converter circuits
Self-commutated converter circuits CO3636-3B
1
USB adapter with MATLAB toolbox for power electronics and process control
USB adapter with MATLAB toolbox for power electronics and process control CO3636-3D
1
Three-phase isolating transformer 300VA
Three-phase isolating transformer 300VA CO3636-3E
1
Three-phase asynchronous motor, 0.3 kW n=1400 (230V/400V)
Three-phase asynchronous motor, 0.3 kW n=1400 (230V/400V) SE2683-1K
1
Incremental position encoder 1024 pulses, 0.3 kW
Incremental position encoder 1024 pulses, 0.3 kW SE2683-3T
1
Coupling guard 0.3kW with LED lighting
Coupling guard 0.3kW with LED lighting SE2662-7C
1
Rubber coupling sleeve, 0.3kW
Rubber coupling sleeve, 0.3kW SE2662-2A
Media:
1
Interactive Lab Assistant: Frequency converter drives 0.3 kW
Interactive Lab Assistant: Frequency converter drives 0.3 kW SO2805-1L
1
Interactive Lab Assistant: Field-oriented control using MATLAB-Simulink 0.3 kW
Interactive Lab Assistant: Field-oriented control using MATLAB-Simulink 0.3 kW SO2805-1P
Additionally required, dynamic servo machine test stand:
1
Dynamic servo machine test system for 0.3kW machines incl. software ActiveServo
Dynamic servo machine test system for 0.3kW machines incl. software ActiveServo CO3636-6X
1
Rubber coupling sleeve, 0.3kW
Rubber coupling sleeve, 0.3kW SE2662-2A
1
Coupling guard 0.3kW with LED lighting
Coupling guard 0.3kW with LED lighting SE2662-7C
Measuring instruments:
1
Power-Multimeter
Power-Multimeter CO5127-2A
Accessories:
1
Set of safety measurement cables, 4mm (31 leads)
Set of safety measurement cables, 4mm (31 leads) SO5148-1L
20
Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R
2
Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V
2
Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II
Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II SO5126-3W
1
Mobile aluminum experiment stand, 3 levels, power strip with 6 sockets, 49"x28"x79" WxDxH (1250x700x1995mm)
Mobile aluminum experiment stand, 3 levels, power strip with 6 sockets, 49"x28"x79" WxDxH (1250x700x1995mm) ST7200-4C
1
Protected power distribution for working stations
Protected power distribution for working stations ST8008-8N
1
Monitor holder for flat screen monitor of weight up to 15 kg / 33 lbs VESA 75/100
Monitor holder for flat screen monitor of weight up to 15 kg / 33 lbs VESA 75/100 ST8010-4T
1
Keyboard adapter for flat screen monitor holders
Keyboard adapter for flat screen monitor holders ST8010-4G
1
Protection cover for three-level experiment trolleys
Protection cover for three-level experiment trolleys ST8010-9Y