Vertical drilling machine, ALZMETALL Alzstar 23iTRONIC (including chuck)

Professional vertical drilling machine (high-speed, durable and precise) powered by 400V for machine-building, industry, tool and mould making, education, crafts, research and development, sheltered workshops, laboratories/institutes, and much more.
With multi-touch-capable display with scratch-resistant glass surface for optimal legibility.
Simple and standardized user guidance through pictograms on the display.
Delivery including quick-release chuck and conical mandrel.

Equipment:

• 7” TFT - LCD display with touch function
• Manual input spindle speed setpoint, speed display actual value
• Integrated drill depth display with touch zero point transfer
• Virtual drilling depth scale in the display
• Machine status displays and warnings in the display
• Service information
• 7 selectable user languages
• Infinitely variable speed setting by means of an adjusting lever
• Spindle protection with electrical cut-off
• Three separate buttons for clockwise rotation - anticlockwise rotation - stop
• Main switch, lockable; mushroom pushbutton (latching) for EMERGENCY STOP
• Clockwise and anticlockwise rotation by means of contactor control
• Control voltage 24 volts
• Protection class IP 54
• Three-phase motor 400 Volt, 50Hz
• CEE mains plug pre-installed, length of lead 3m

Tech. data:

• Drilling capability steel E 335 (St 60) 23mm
• Tapping steel E 335 (St 60) M14
• Tapping cast iron EN-GJL-200 (GG 20) M16
• Short spindle MK 2
• Spindle travel 100mm
• Overhang 250mm
• Column diameter 90mm
• Platform, usable support area (W x D) 370x300mm
• T-grooves, number x width x spacing 2x14x160mm
• Distance between spindle and platform min./max. 140/670mm
• Manual feed
• Machine height without options approx. 1770mm
• Net weight approx. 175kg
• Infinitely variable drive
• Motor: n = 750 / 1500rpm 0.6 / 0.95 kW
• Spindle speed 225 - 4300 rpm