Item No.: ST7200-4K

Mobile InsTrain/CarTrain/TruckTrain experiment stand, SybaPro 1070x1350x700mm

The mobile experiment stand made of aluminium profiles is designed to accommodate InsTrain/CarTrain and TruckTrain systems.
Whether it be for conventional frontal instruction or practical hands-on student experiments, the InsTrain experiment stand permits all the InsTrain systems to be set-up safely and structured clearly.
A modern and educationally designed workplace is created for students and trainees with work surfaces and system integration.

High-quality, mobile experiment and demonstration stand from the Sybapro series complete with table legs made of aluminium profiles, PC installation bracket, under-cabinet with drawers and additional storage shelf.
This trolley is compatible with a host of additional accessories and extensions from the Sybapro series.

Tabletop + storage shelves:

  • Tabletop 1000 x 700 x30 mm (WDH), tabletop height 830 mm
  • Bottom shelf/storage shelf 1000 x 525 x 25mm
  • Tabletops made of highly compressed, multi-layered fine chipboard conforming to DIN EN 438-1
  • Colour grey, RAL 7035, with slightly textured coating (Resopal) 0.8 mm thick on both sides, conforming to DIN 16926
  • Resistant to many chemicals and reagents, such as dilute acids and bases
  • Resistant to heat, e.g. liquid solder and point heating caused by soldering iron, lit cigarette or similar.
  • Table-top frame with solid, impact-resistant edging made of 3-mm thick coloured plastic, colour RAL 7047
  • Coatings and adhesive are PVC-free
  • Power supply with 6-outlet power terminal strip, mounted underneath the frame, 2-m power cable and Schuko earthed plug.

Frame:

  • 2 extruded aluminium profiles with multi-groove profile
  • 8 identical grooves in the extruded aluminium profiles (3 on each side + 1 each front and rear)
  • Grooves to accommodate industry-standard equipment holders
  • Stable roller frame made of rectangular tube with 4 two-wheeled swivel casters, 2 with brakes
  • Table frames made of rigid rectangular tubing combination
  • Acid-resistant epoxy-resin coating, approx. 80µm thick, colour RAL 7047

Suspended under-cabinet:

  • 1 drawer for utensils
  • 2 drawers 2 HU
  • Effective width 330mm, effective depth 480mm
  • Lockable and with central locking system
  • Metal drawers with all-around series of insert slots
  • Body made of 19-mm thick, highly compressed, multi-layer fine chipboard with plastic coating conforming to quality class E1 on both sides
  • Dimensions: 430 x 580 x 290mm (WxHxD)

PC attachment bracket:

  • With 3 screwed-in rubber stoppers, dimensions approx. 65 x 65 x 114 mm (secures the PC in place from above)
  • The PC attachment bracket can be adjusted in terms of its height at the aluminium profile
  • Can be mounted on the left or right, includes attachment materials
  • Acid-resistant epoxy-resin coating, approx. 80 µm thick, colour RAL 7047

Dimensions:

Tabletop height 830mm

Dimensions without CarTrain/InsTrain attachment: 1070 x 1350 x 700 (W x H x D)

Dimensions with CarTrain/InsTrain attachment: 1070 x 1650 x 700 mm (W x H x D)

 

The mobile Car-/Ins-Train experiment stand is delivered already pre-assembled.