Item No.: ST8035-5A

Elec. height-adjustable, heavy-duty lab workbench SybaWork, 1600 x 700-1030 x 900mm

The electrically height-adjustable desks from the SybaPro series are the ergonomic workplaces of the future and feature lots of advantages.
By adjusting the table height, the person at work is less subject to fatigue and is able to focus and perform better.
Being able to stand up while working also improves reaction speed, boosts alertness and alternating between standing and sitting also trains the back and leg muscles.
This also provides relief to the spinal column and stimulates circulation.
Especially when doing assembly work, the high-adjustment feature supports all kinds of jobs in a workshop and thus facilitates dynamic work.

The height value of the digital display can be set and displayed in inches or centimeters. The height value can be changed to the actual table height if this has changed, e.g., due to leveling or table supports, etc.
The height adjustment range of the table can be limited upwards and downwards. New limits may be necessary if objects above or below the table could collide with the table.

Table frame:
  • Table frame made of high-quality steel
  • Double-T shaped table frame with 4 lift columns/motors for:
    • full load capacity with lots of leg space
    • compensates for any asymmetrical loads/tilting during use
    • extremely high load capacity
    • combination options with experiment equipment like power ducts or training panel frames
    • maximum stability while avoiding risk of tipping over
  • Frame is powder coated silver (similar to RAL9006)
  • 4 synchronised lift columns incl.4 motors 
  • Fastening option in the foot extensions for stationary assembly of the tables (incl. screws, washers and dowels)
Operating element:
  • Illuminated hand-held touch-activated control with soft start/stop and memory function
  • Digital height indicator display
  • 3 memory settings to specify pre-defined heights
Tabletop:
  • 40mm thick quality beech wood multiplex tabletop (BB/BB)
  • Sturdy and solid design with 29 layers of laminated hardwood
  • Surface edges oiled all-around to protect surface against liquids, dirt and dust (diffusible, dirt- and water-resistant surfaces)
  • All edges with radius
  • Softened according to DIN 68705
Technical data:
  • Electrical height adjustment from 700 – 1030mm = 330mm stroke
  • Adjustment speed 40mm/s
  • Motorised operation performed by 4 synchronised electric motors with soft start / stop functions
  • Synchronisation via 2 electronic control units
  • Weight-bearing capacity 350kg
  • Low operating noise level < 55dB
  • Power connection terminal 220V-240V via Euro plug
  • Minimised and almost undetectable power consumption during standby operation
Dimensions:
  • Dimensions 1600x700-1030x900mm (w x h x d)