Storage cabinet with 2 hinged doors + 3 drawers, 1000 x 2039 x 600mm

SybaPro combination laboratory cabinet, with 2 doors in upper section and 3 drawers in the lower third of the cabinet.
This cabinet was designed to store larger equipment and systems in the upper door area and measuring devices as well as smaller parts and miscellaneous in the lower drawer area.
This storage cabinet for labs is tested in accordance with safety requirements specified in DIN EN 16121

• Body made of 19-mm thick, highly compressed, multi-layer fine chipboard with melamine-resin-based plastic coating conforming to quality class E1 on both sides
• Body colour light grey RAL7035, other front panel colours available on request.
• Side walls feature rows of perforations and drill holes at 32-mm intervals, thus using shelves 3 (DIN A4) folder height compartments are possible.
• Including an installed shelf base as partition between door and drawer area (at approx. 760 mm height).
• All edges made of solid protective edging, 3-mm-thick coloured plastic, colour grey RAL 7047
• Rear wall made of 10-mm thick plastic-coated three-ply quality chipboard with grooves conforming to DIN EN 14322
• Hinged doors with adjustable door straps, with three-point locking, interchangeable cylinder locks and handles (security locks suitable for safe storage lockers), opening angle 250°
• Outer surfaces are resistant to scratches and abrasion thanks to crystal texturing
• Incl. 3 drawers as follows: 2x front drawer face height 220mm, 1x face height 315mm
  • Drawers with central locking (1 lock seals all drawers simultaneously) and metal handle
  • Internal drawer dimensions approx. 940x480 mm (payload width x depth)
  • Drawer design as metal drawer with all-around insert slots
• The cabinet has an integrated leveller to offset any floor unevenness
• Height of door area approx. 1130 mm, height of drawer area approx. 760 mm
• Overall dimensions: 1000 x 2039 x 600 mm (WxHxD)