SybaPro Experiment trolley for Ins-/Car-/TruckTrain, 1085x1350x800mm

Lucas-Nülle laboratory trolley for InsTrain/CarTain/TruckTrain (laboratory and industrial design grey)
This experiment trolley is specifically designed to accommodate CarTrain and TruckTrain systems.

Tabletop and Storage Shelf

• Extra-large 800mm (32") deep tabletop
• Extra-large storage shelf
• 30mm (1.2") thick tabletop and storage shelf made of highly compressed, multi-layer fine chipboard
• Boards are finished on both sides with 0.8mm thick and slightly textured laminate coating (Resopal)
• Boards are framed with solid, impact-resistant protective edging made of 3mm thick colored plastic
• Tabletop 1085 x 30 x 800mm, 43" x 1.2" x 32" (WHD)
• Shelf 1005 x 30 x 445mm, 40" x 1.2" x 18" (WHD)

Aluminum Frame

• 4 lateral elements made of aluminum extrusions with multi-groove profile provide
• Special frame hardware and redundant fasteners for profiles, casters, table-top and storage shelf
• Each aluminum extrusion has 8 equal grooves according to industrial standards (Slot 10)

Suspended cabinet

• Suspended cabinet with 3 drawers and central locking
• Usable width 330mm (13"), depth 480mm (19")
• Metal drawers with all-around insert slots for dividers
• Dimensions: 430x580x290mm, 17"x23"x11" (WxHxD)

Special features

• Large 100mm (4") casters, 2 of which have brakes
• Low center of gravity, great stability and absolute secure against tipping over
• Reinforced edges of the tabletop frame surround the four load-bearing aluminum profiles on three sides
• Castors and tabletop frame are made of stable, 5mm thick angled steel combination
• Continuous duct with four openings to feed and pull cables for an orderly arrangement
• Four transverse frame angles (two left and two right) enable the installation of under-table cabinets
• Power strip with 6 outlets, lead and earthed plug
• Angle bracket with rubber stoppers to fasten a PC
• Acid-resistant epoxy-resin 80µm thick powder coating
• Mobile experiment trolley is supplied pre-assembled