Item No.: CO4206-1J

EloTrain: Basics of electrics / electronics in automotive

The EloTrain course "Fundamentals of electronics/electrical engineering in motor vehicles" offers trainees the perfect introduction to the world of electrical engineering. All the necessary basics are taught in a simple and visually impressive way, while always maintaining the reference to automotive technology. The EloTrain course offers an introduction to the world of electronics/electrical engineering across all apprenticeship years, providing the apprentice with all the knowledge in this field that he needs for his further training. This knowledge in is of elementary importance, especially in times of ever more advanced electrification of vehicles. 

The theory is conveyed by means of an easy-to-understand text section that concentrates on the essential points, as well as numerous pictures and professional animations. The knowledge imparted is then tested in various tests and further deepened in practical exercises. In these, the use of the most important measuring instruments (oscilloscope, multimeter) is trained on the one hand, and on the other hand, the special features and functioning of the individual components are analysed in an experimental way. The highlight of each chapter is the special automotive technology experiment, in which the respective component is brought into a direct connection with automotive technology. This means that an affinity to automotive engineering is created in the trainee from the very first chapter.

General circuit components:
- 2 x pushbutton ON        
- 2 x switches OFF    
- 1 x toggle switch    
- 3 x lamp socket, E10    
- 1 x relay 15 V        
- 1 x loudspeaker    
- 1 x 12 V motor    

Ohmic resistors:
- 2 x 22 Ω    
- 1 x 27 Ω    
- 1 x 33 Ω    
- 1 x 68 Ω    
- 3 x 100 Ω    
- 3 x 330 Ω    
- 2 x 470 Ω    
- 3 x 680 Ω    
- 2 x 1 kΩ    
- 2 x 2.2 kΩ    
- 1 x 3.9 kΩ    
- 1 x 10 kΩ    
- 1 x 22 kΩ    
- 1 x 47 kΩ    
- 1 x 270 kΩ    
- 1 x 1 MΩ    
- 1 x 2 kΩ potentiometer    
- 1 x 10 kΩ potentiometer    

Temperature dependent resistors:
- 1 x NTC 10 kΩ    
- 1 x PTC 52 Ω    

Semiconductor components:
- 1 x LDR    
- 2 x LED "orange    
- 2 x LED "red    
- 2 x LED "green    
- 2 x LED "yellow    
- 1 x Z-diode ZPD 6.2    
- 6 x diode Ge AA 118    
- 2 x transistor BD237    
- 1 x transistor BD237    
- 1 x transistor BD238    
- 1 x transistor BC547    
- 2 x N-channel FET    
- 2 x P-channel FET    

Inductive components:
- 1 x coil 100 mH    
- 1 x coil N = 300    
- 1 x coil N = 900    
- 1 x cut band core set    

Capacitive components:
- 1 x electrolytic capacitor 10 µF    
- 1 x electrolytic capacitor 100 µF    
- 1 x electrolytic capacitor 220 µF    
- 2 x electrolytic capacitor 470 µF    
- 2 x capacitor 1 µF    
- 2 x capacitor 0,47 µF    
- 1 x capacitor 33 nF