Item No.: CO4206-1D

Course EloTrain 4: Basic electronic circuits

Training contents:

  • Basic amplifier circuits using bipolar transistors
  • Basic amplifier circuits using field effect transistors (FETs)
  • Two-stage AC amplifier
  • Darlington pair amplifier
  • Coupled emitter amplifiers
  • Phase reversing stages
  • Differential amplifiers
  • Two-stage DC amplifier with complementary transistors
  • Push-pull amplifiers
  • Positive and negative feedback
  • Square-wave generators
  • Threshold switches (Schmitt triggers)
  • Astable multivibrators
  • Monostable multivibrators
  • Bistable multivibrators (flip-flops)
  • Saw tooth generators (pulse generators)
  • Sine-wave generators with RC and LC elements
  • Amplitude modulators and demodulators
  • Frequency modulator
  • Single-phase and three-phase rectifier circuits
  • Voltage multipliers
  • Stabilising circuits
  • Voltage and current regulators (linear)
  • Switched-mode voltage regulators
  • DC converters
  • Pulse generation using diacs
  • Pulse generation using unijunction transistors
  • Phase control using thyristors
  • Phase control using triacs
  • Full-wave control with zero-voltage switch
  • DC voltage switch using thyristors
  • Using op amps as inverting amplifiers
  • Using op amps as non-inverting amplifiers
  • Using op amps as differential amplifiers
  • Dynamic response of operational amplifiers (op amps)

 

2-mm plug-in components:

  • All components and jumpers equipped with gold-plated 2-mm contacts
  • Housing made of transparent, high impact-resistance plastic
  • Top featuring scratch-resistant, high-contrast screen print of type and circuit diagram of component
  • Easy-to-open housing for repair purposes

 

Includes:

  • 29 film resistors 10 Ω ... 1 M Ω
  • 2 potentiometers, linear 1 k Ω, 10 k Ω
  • 11 capacitors 47 pF ... 1 μF
  • 4 electrolyte capacitors 10 μF ... 470 μF
  • 2 coils 10 mH, 33 mH
  • 2 transformer coils N = 300, N = 900
  • 1 cut strip-wound core (1 pair)
  • 2 LEDs, green
  • 6 silicon diodes 1N4007, 1 germanium diode AA113
  • 1 Zener diode 4.7 V
  • 2 transistors BC547 base left + base right
  • 2 transistors BD237 base left + base right
  • 1 transistor BD238 base right
  • 1 field effect transistor J112
  • 1 unijunction transistor
  • 1 DIAC, 1 thyristor, 1 TRIAC
  • 1 operational amplifier
  • 1 switch
  • 1 button
  • 1 incandescent lamp 15 V with socket E10
  • 1 speaker
  • Labsoft browser and course software
  • Case for storage of component set