Item No.: CO3713-8R

SIMATIC S7-1516-3 PN/DP 32 DE, 32 DA, 8 AE, 4 AA, 24V / 6 A power supply

The training system for PLC equipment from the SIMATIC S7-1500 series. The openly accessible
profile rail is equipped with the input and output modules of the SIMATIC S7-1500 series. The PLC module can be programmed via Ethernet. A programming adapter is not required. An up-to-date version of the programming software is also included.

  • Stable console with slip-resistant bases
  • Freely accessible profile rail for PLC set-ups
  • Fully integrated power supply: 24 V/6 A DC
  • Operating voltage: 220-240 V AC, 50-60 Hz
  • PROFINET IO (2-port switch) is used as the standard interface
  • Additional PROFINET interface, e.g. for separation of networks
  • OPC UA Server
  • Extensible by means of communications modules for bus systems and point-to-point links
  • 1 PROFIBUS interface
  • Built-in web server for easy access to configuration data and operating data relevant to the system via web browser
  • 16 digital inputs DC 24 V on 4 mm safety sockets
  • 16 pushbuttons/momentary contact switches for digital input simulation
  • 16 digital outputs DC 24 V on 4 mm safety sockets
  • 16 digital inputs DC 24 V via 9-pin, 25-pin and 37-pin system connector plugs
  • 16 digital outputs DC 24 V via 9-pin, 25-pin and 37-pin system connector plugs
  • 8 analog inputs -10 V ... +10 V and 0 ... 20 mA
  • 4 analog outputs selectable -10 V ... +10 V or 0...20 mA
  • 1 analog output with -10 V ... +10 V adjustable via potentiometer
  • 1 analog output with 0 ... 20 mA adjustable via potentiometer
  • 9-pin and  25-pin sockets for direct control of mechatronic systems
  • 37-pin connector plug and 37-pin socket
  • Dimensions (HxWxD): (297 x 456 x 230) mm
  • Weight: 6.5 kg incl. PLC

1 x combined licence, transferrable

  • For: SIMATIC STEP 7 Professional V14 SP1* or newer
    STEP 7 Professional V14 SP1* (LAD, FBL, STL), S7-GRAPH, S7-SCL, S7-PLCSIM
  • Or: SIMATIC STEP 7 Professional 2010 SR4
    STEP 7 V5.5 SP4 (LAD, FBL, STL), S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6, S7-PLCSIM V5.4 SP5

* The supplied version is the one currently available from Siemens.

 

For more sophisticated requirements a combination of the SIMATIC S7 – SPS and the Touch Panel TP700 is available.