Item No.: ST8090-4C

Refrigeration tool set 2, fine mechanics set (22 parts) inlay size 300x600mm

Refrigeration tool set 1, for drawers – fine mechanics set, consisting of 22 parts in two-colour (black/grey) foam inlay of size 300x600 mm,
suitable for drawers with a panel height of at least 100mm.

Set consisting of:

  • Stainless wire brush
    Brushes made of corrugated stainless steel wire, height of bristles 25 mm, V-shaped, wooden handle with two holes for hanging up
  • Precision pocket vernier callipers
    For internal, external and depth measurement (4 measuring modes), reading via vernier scale 0.05 mm or 1/128"
    Length of jaws 40 mm or 1.57 inches, with securing screw
    Vernier and scale matt chromed, thread table on rear, non-rust stainless steel, DIN 862
  • 9x round-head angled screwdrivers (hex), in folder plastic holder
    For screws in difficult-to-reach places, maximum pivot angle 30°
    Round-head profile at long end, nickel-coated, chrome-vanadium 59CrMoV4 / 1.2242
    • Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm
  • Awl
    Burnished, textured handle, straight and angled steel tips made of tempered steel
  • Punch
    Fully hardened and tempered, head inductively tempered, working side ground and oiled
    Chrome-molybdenum-vanadium 45CrMoV7/1.2328 as per DIN 7250
  • Folding ruler 2m
    Precision class III as per EU directive, hinges made of epoxy-coated steel with covered rivet
  • Bendable steel tape measure
    Precision class II as per EU directive, made of non-rust measuring tape steel
  • 2 Framing squares
    1x 90° angle with stop, with open stop corner, galvanised, steel
    1x 90° angle without stop, with open stop corner, galvanised, steel
  • 4 Files
    Blade hardened on three sides, blunt end, 2-component hilt, design conforms to DIN 7261, form A
    • Contents: 1x flat file (bastard, cut no. 1), 1x flat file (smooth, cut no 3), 1x semi-circular file (2nd cut, cut no. 2) and 1x triangular file (2nd cut, cut no. 2)
  • File brush
    Working surface 250 x 40 mm, wood with bristles made of dense steel wire

    Refrigeration tool set 1, for drawers – fine mechanics set, consisting of 22 parts in two-colour (black/grey) foam inlay of size 300x600 mm

    Set consisting of:

  • Stainless wire brush
    Brushes made of corrugated stainless steel wire, height of bristles 25 mm, V-shaped, wooden handle with two holes for hanging up
  • Precision pocket vernier callipers
    For internal, external and depth measurement (4 measuring modes), reading via vernier scale 0.05 mm or 1/128"
    Length of jaws 40 mm or 1.57 inches, with securing screw
    Vernier and scale matt chromed, thread table on rear, non-rust stainless steel, DIN 862
  • 9x round-head angled screwdrivers (hex), in folder plastic holder
    For screws in difficult-to-reach places, maximum pivot angle 30°
    Round-head profile at long end, nickel-coated, chrome-vanadium 59CrMoV4 / 1.2242
    • Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm
  • Awl
    Burnished, textured handle, straight and angled steel tips made of tempered steel
  • Punch
    Fully hardened and tempered, head inductively tempered, working side ground and oiled
    Chrome-molybdenum-vanadium 45CrMoV7/1.2328 as per DIN 7250
  • Folding ruler 2m
    Precision class III as per EU directive, hinges made of epoxy-coated steel with covered rivet
  • Bendable steel tape measure
    Precision class II as per EU directive, made of non-rust measuring tape steel
  • 2 Framing squares
    1x 90° angle with stop, with open stop corner, galvanised, steel
    1x 90° angle without stop, with open stop corner, galvanised, steel
  • 4 Files
    Blade hardened on three sides, blunt end, 2-component hilt, design conforms to DIN 7261, form A
    • Contents: 1x flat file (bastard, cut no. 1), 1x flat file (smooth, cut no 3), 1x semi-circular file (2nd cut, cut no. 2) and 1x triangular file (2nd cut, cut no. 2)
  • File brush
    Working surface 250 x 40 mm, wood with bristles made of dense steel wire