Item No.: SE2675-1C

Control cabinet for cold storage cell, all components fitted with control voltage

The set consists of the following:

  • Switch cabinet attached at the rear to the aluminium profiles of the workbench
  • Dimensions: 800x800x300mm
  • 5 Top-hat rails
  • 7 Cable ducts
  • 1 Flexible cable tube acting as a cable harness to the cabinet door
  • Switch cabinet pre-populated with components with control voltage pre-wired
  • 1 Line circuit breaker, 3-pole/16A/B
  • 9 Line circuit breakers, 1-pole/10A/B
  • 1 Control transformer, 400V/230V (160VA) (T1)
  • 1 Operational period counter built into door
  • 1 Switch for load heating built into door
  • 1 Switch for control voltage built into door
  • 1 Main switch built into door
  • 3 Green indicator lights built into door
  • 3 Red indicator lights built into door
  • 1 Blue reset push button built into door
  • 5 Power contactor with auxiliary contact, 230V
  • 5 Auxiliary contactors with auxiliary contact, 230V
  • 1 Transformer protection switch
  • 1 Auxiliary switch for motor protection
  • 1 Time-delay relay, ETR4-11-A
  • 1 Time-delay relay, ETR4-69-A
  • 1 ELCB/RCD, 2-pole, I 25 A, I 30 mA
  • 1 Legrand defrosting timer
  • 1 Switch delay
  • 1 Transformer for continuous load 12+12 V/24VA, 230 V/50 Hz (T2)
  • 1 Motor protection switch 0 – 4,0
  • 1 Motor protection switch 0 – 0,63 (F1)
  • 1 Elliwell ID 974 230V/AC with two sensors built into door
  • 1 Blemo smooth start unit, SH21-5.5/4
  • 94 Terminals, 0-2.5mm2, grey
  • 11 Terminals, 0-2.5mm2, blue
  • 29 Terminals, 0-2.5mm2, green/yellow
  • 30 Dividers
  • 2 End terminals
  • 25 20-mm openings with screw fittings
  • 5 16-mm openings with screw fittings
  • Set of labels