IMS IMS3d Sorting with double magazine

IMS IMS3d Sorting with double magazine

A workpiece carrier is located on the conveyor belt. The carrier is positioned under one of the two shafts for the gravity-feed magazine. The sorting station has two magazines that accommodate ten bottom pieces. One piece is selected and placed in the carrier. The carrier and its load are then conveyed to the end of the belt to be passed on to the next sub-system.

Training contents:

  • Basic notes on conducting experiments
  • Detailed experiment description
  • Basic notes on control sequences
  • Programming the sequential process control
Equipment set comprising the following:
1
Cyber physical conveyor system with PLC
Cyber physical conveyor system with PLC LM9515
1
Separation double station
Separation double station LM9645
1
IMS displacement measurement module
IMS displacement measurement module LM9677
1
Symmetrical workpiece transport pallet
Symmetrical workpiece transport pallet LM9532
2
Workpiece, bottom section, white
Workpiece, bottom section, white LM9524
2
Workpiece, bottom section, black
Workpiece, bottom section, black LM9525
Accessories:
1
DC power supply 24 V/5 A for IMS conveyor belts
DC power supply 24 V/5 A for IMS conveyor belts LM9672
1
Interface cable 25-pin, Sub-D socket / plug 1m
Interface cable 25-pin, Sub-D socket / plug 1m LM9066
Media:
1
Interactive Lab Assistant: IMS 1 Cyber Physical Conveyor Belt System
Interactive Lab Assistant: IMS 1 Cyber Physical Conveyor Belt System SO2805-5H
1
Interactive Lab Assistant: IMS X Mechatronic Basic Stations
Interactive Lab Assistant: IMS X Mechatronic Basic Stations SO2805-5X
1
QuickChart IMS 1.5 Cyber-physical conveyor belt system
QuickChart IMS 1.5 Cyber-physical conveyor belt system SO6200-2P
1
QuickChart IMS 3d Mechatronics Separation double station
QuickChart IMS 3d Mechatronics Separation double station SO6200-2Q
Additionally recommended:
1
Compressor, low-noise
Compressor, low-noise SE2902-9L
1
Tubing and accessory set for mechatronics systems
Tubing and accessory set for mechatronics systems LM9571
1
Set of Allen keys
Set of Allen keys LM9716
1
Mechatronics experiment trolley with 2 level frame 1200x760x900mm WxHxDxD
Mechatronics experiment trolley with 2 level frame 1200x760x900mm WxHxDxD ST7200-3T
1
Monitor holder for flat screen monitor of weight up to (10kg / 22lbs)
Monitor holder for flat screen monitor of weight up to (10kg / 22lbs) ST8010-4K
1
Protective cover for 1200mm wide IMS experiment trolleys with training panel
Protective cover for 1200mm wide IMS experiment trolleys with training panel ST8010-8L

In areas where there are high levels of humidity the membrane dryer

with water trap should be used to avoid...   more

1
IDG3 membrane dryer with rapid coupling and filter AF20 with water trap
IDG3 membrane dryer with rapid coupling and filter AF20 with water trap LM9671
Optional Accessories:
1
Touch Panel KTP700 Basic Trainer Package
Touch Panel KTP700 Basic Trainer Package CO3713-4Q
1
IMS manual control unit
IMS manual control unit LM9638