EEM 4.5-1 Fault simulation on electrical machines 1kW

EEM 4.5-1 Fault simulation on electrical machines 1kW

Fault simulation performed by measuring winding and insulation resistances. All measurements are performed in the no-voltage state. The following faults can be simulated:

  • Winding breaks in the coils
  • Insulation faults winding to winding
  • Insulation faults winding to frame
  • Combinations of different faults
  • Fault monitoring and repair instructions
Basic equipment set, consisting of: 
1
Fault simulator for three-phase asynchronous squirrel-cage motor
Fault simulator for three-phase asynchronous squirrel-cage motor SE2662-9D
1
Three-phase asynchronous motor, squirrel-cage, 1kW
Three-phase asynchronous motor, squirrel-cage, 1kW SE2672-5G
1
Insulation tester "Insu 10"
Insulation tester "Insu 10" LM2333
Media:
1
Manual EEM/F, Troubleshooting on electrical machines
Manual EEM/F, Troubleshooting on electrical machines SH5002-3P
Additionally required, dynamic servo machine test stand:
1
Servo machine test bench for 1kW machines incl. ActiveServo software(D,GB,F,E)
Servo machine test bench for 1kW machines incl. ActiveServo software(D,GB,F,E) CO3636-6W
1
Rubber coupling sleeve, 1kW
Rubber coupling sleeve, 1kW SE2662-6A
1
Coupling guard, 1kW
Coupling guard, 1kW SE2662-6B
1
Shaft end guard, 1kW
Shaft end guard, 1kW SE2662-6C
1
QuickChart, Servo-machine test stand safety and operating instructions (GB)
QuickChart, Servo-machine test stand safety and operating instructions (GB) SO6200-7D
Power supply:
1
Universal power supply for electrical machines
Universal power supply for electrical machines CO3212-5U
Measuring instruments:
1
Digital/analog multimeter, wattmeter, power-factor incl. software
Digital/analog multimeter, wattmeter, power-factor incl. software CO5127-1Z
Accessories:
20
Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R
2
Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V
2
Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II
Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II SO5126-3W
1
Set of safety measurement cables, 4mm (31 leads)
Set of safety measurement cables, 4mm (31 leads) SO5148-1L
1
Mobile aluminum experiment stand, 3 levels, power strip with 6 sockets, 49"x28"x79" WxDxH (1250x700x1995mm)
Mobile aluminum experiment stand, 3 levels, power strip with 6 sockets, 49"x28"x79" WxDxH (1250x700x1995mm) ST7200-4C
1
Protected power distribution for working stations
Protected power distribution for working stations ST8008-8N
1
Monitor holder for flat screen monitor of weight up to 15 kg / 33 lbs VESA 75/100
Monitor holder for flat screen monitor of weight up to 15 kg / 33 lbs VESA 75/100 ST8010-4T
1
Keyboard adapter for flat screen monitor holders
Keyboard adapter for flat screen monitor holders ST8010-4G
1
Protection cover for three-level experiment trolleys
Protection cover for three-level experiment trolleys ST8010-9Y