IMS 7 Handling 

IMS 7 Handling 

A carrier with a fully assembled and tested workpiece is located on the conveyor belt. A handling station is located above the middle of the conveyor belt. The carrier is stopped at the removal position. The handling module lifts up the workpiece and transfers it to one of two possible positions. The empty carrier is conveyed to the end of the belt to be passed on to the next sub-system.

Equipment set comprising the following:
1
Handling station
Handling station LM9683
1
Cyber-physical Conveyor System
Cyber-physical Conveyor System LM9515
1
IMS displacement measurement module
IMS displacement measurement module LM9677
1
Workpiece transport pallet
Workpiece transport pallet LM9520
1
Workpiece, bottom section, white
Workpiece, bottom section, white LM9524
1
Workpiece, bottom section, black
Workpiece, bottom section, black LM9525
Accessories:
1
DC power supply 24V/5A for IMS conveyor belts
DC power supply 24V/5A for IMS conveyor belts LM9672
1
25-pin serial interface cable, Sub-D plug/socket
25-pin serial interface cable, Sub-D plug/socket LM9061
Media:
1
Interactive Lab Assistant: IMS 1.5 Conveyor Belt with PLC and Processing Stations
Interactive Lab Assistant: IMS 1.5 Conveyor Belt with PLC and Processing Stations SO2805-5N
1
QuickChart IMS 1.5 Cyber-physical conveyor belt system
QuickChart IMS 1.5 Cyber-physical conveyor belt system SO6200-2P
1
QuickChart, IMS 7 Mechatronics Handling sub-system
QuickChart, IMS 7 Mechatronics Handling sub-system SO6200-1G
Additionally recommended
1
Compressor, low-noise
Compressor, low-noise SE2902-9L
1
Tubing and accessory set for mechatronics systems
Tubing and accessory set for mechatronics systems LM9670
1
Set of Allen keys
Set of Allen keys LM9716
1
SybaPro mobile IMS experiment trolley with experiment frame, 1200mm, 2 levels
SybaPro mobile IMS experiment trolley with experiment frame, 1200mm, 2 levels ST7200-3T
1
Monitor holder for flat screen monitor of weight up to 10kg, DIN A4, VESA 75/100
Monitor holder for flat screen monitor of weight up to 10kg, DIN A4, VESA 75/100 ST8010-4K
1
Protective cover for 1200mm wide IMS experiment trolleys with training panel
Protective cover for 1200mm wide IMS experiment trolleys with training panel ST8010-8L

In areas where there are high levels of humidity the membrane dryer

with water trap should be used to avoid...   more

1
IDG3 membrane dryer with rapid coupling and filter AF20 with water trap
IDG3 membrane dryer with rapid coupling and filter AF20 with water trap LM9671
Optional Accessories:
1
Touch Panel KTP700 Basic Trainer Package
Touch Panel KTP700 Basic Trainer Package CO3713-4Q
IMS/IPA Tester and Fault Simulator
1
IMS/IPA test and fault simulator
IMS/IPA test and fault simulator CO3713-7V
2
25-pin serial interface cable, Sub-D plug/socket
25-pin serial interface cable, Sub-D plug/socket LM9061
1
QuickChart IMS test and fault simulator
QuickChart IMS test and fault simulator SO6200-1Z